There is no debate that embroidered looks & dimensional products are some of the most popular trends with hats. 3D hat embroidery is achievable with a heat press machine in 60 seconds. Next, you will learn how to get these 3D looks with the Hotronix® 360 IQ Hat Heat Press.
Step #1
Load the hat into the Hotronix® 360 IQ Hat Heat Press and if applicable, pull the sweat band out. Pull the hold down device lever to ensure the hat is secure and positioned correctly.
Step #2
Take your 3D embroidered emblem, which already has heat activated adhesive on the back, and position it on the hat.
Step #3
Choose the correct Foam Cover Pad to cover your emblem. There are various thicknesses that are included with your heat press. You will want to match the thickness of your emblem with the thickness of the Foam Cover Pad.
Step #4
Now you’re ready to heat apply! Set the hat press to 280 degrees with top heat, and 320 degrees with bottom heat. Your hat is ready in 60 seconds! You’ve successfully created 3D hat embroidery with only a heat press machine.
To watch a recap of these four steps, check out this video:
In addition to the video, check out another blog post that talks more about the Hotronix® 360 IQ Hat Heat Press. Here, you’ll learn everything you need to know and see what other customers are saying about it!